狼友av免费一区|午夜AV人气不卡黄色福利av资源|成人久久99视频|国产亚洲1区2区|久久亚洲日韩片无码|超碰人人7089|日韩av天天草草草|亚洲av逍遥社区|可以免费观看亚洲哦|91av超碰在线

廣東省應對技術性貿易壁壘信息平臺
當前位置:廣東省應對技術性貿易壁壘信息平臺專題研究國外計量國外計量準入

相關標準

信息來源:廣東省WTO/TBT通報咨詢研究中心    更新日期:2022-09-19
文件類型文件號文件題目(中文)文件題目(英文)原文鏈接
標準AS 62052.11:2018電量計量裝置(ac) 一般要求、試驗和試驗條件 第11部分:計量裝置Electricity metering equipment (ac) — General requirements, tests and test conditions, Part 11: Metering equipment (IEC 62052-11:2016 (ED.1.1) MOD)查看
標準AS 62052.21:2018電量計量裝置(ac) 一般要求、試驗和試驗條件 第21部分:資費和負荷控制裝置Electricity metering equipment (ac) — General requirements, tests and test conditions, Part 21: Tariff and load control equipment (IEC 62052-21:2016 (ED.1.1) MOD)查看
標準AS 62052.31:2017電能計量設備(AC) 一般要求、試驗和試驗條件 第31部分:產品安全要求和試驗Electricity metering equipment (AC) - General requirements, tests and test conditions Product safety requirements and tests (IEC 62052-31:2015 (ED.1.0) MOD)查看
標準AS 62052.31:2017 Amd 1:2021電能計量設備(AC) 一般要求、試驗和試驗條件 第31部分:產品安全要求和試驗Electricity metering equipment (AC) — General requirements, tests and test conditions, Part 31: Product safety requirements and tests (IEC 62052-31:2015 (ED.1.0) MOD)查看
標準AS 62053.21:2018電量計量裝置(ac) 特殊要求 第21部分:靜止式有功電能表(1級和2級)Electricity metering equipment (ac) — Particular requirements, Part 21: Static meters for active energy (classes 1 and 2) (IEC 62053-21:2016 (ED.1.1) MOD)查看
標準AS 62053.22:2018電量計量裝置(ac) 特殊要求 第22部分:靜止式有功電能表(0.2 S級和0.5S級)Electricity metering equipment (ac) — Particular requirements, Part 22: Static meters for active energy (classes 0.2 S and 0.5 S) (IEC 62053-22:2016 (ED. 1.1) MOD)查看
標準AS 62053.23:2018電量計量裝置(ac) 特殊要求 第23部分:靜止式無功電能表(2級和3級)Electricity metering equipment (ac) — Particular requirements, Part 23: Static meters for reactive energy (classes 2 and 3) (IEC 62053-23:2016 (ED.1.1) MOD)查看
標準AS 62053.24:2018電量計量裝置(ac) 特殊要求 第24部分:基頻靜止式無功電能表(0.5s 1s和1級)Electricity metering equipment (ac) — Particular requirements, Part 24: Static meters for reactive energy at fundamental frequency (classes 0.5 S, 1 S and 1) (IEC 62053-24:2016 (ED.1.1) (MOD)查看
標準AS IEC 62053.31:2018電量計量裝置(ac) 特殊要求 第31部分:機電和電子儀表用脈沖輸出裝置(僅雙線)Electricity metering equipment (a.c.) — Particular requirements, Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)查看
標準AS 62053.61:2018電量計量裝置(ac) 特殊要求 第61部分:功耗和電壓要求Electricity metering equipment (a.c.) — Particular requirements, Part 61: Power consumption and voltage requirements (IEC 62053-61:1998, MOD)查看
標準AS 62054.11:2018電量計量(ac) 費率和負荷控制 第11部分:電子式紋波控制接收機的特殊要求Electricity metering equipment (a.c.) — Tariff and load control, Part 11: Particular requirements for electronic ripple control receivers (IEC 62054-11:2004 (ED.1.1), MOD)查看
標準AS 62054.21:2018電量計量(ac) 費率和負荷控制 第21部分:定時開關的特殊要求Electricity metering (AC) — Tariff and load control, Part 21: Particular requirements for time switches (IEC 62054-21:2017 (ED.1.1), MOD)查看
標準AS 62056.21-2006電量計量 儀表讀數、資費和負荷控制用數據交換 直接本地?cái)?shù)據交換Electricity metering - Data exchange for meter reading, tariff and load control - Direct local data exchange查看
標準AS 4647-2011膜式燃?xì)獗?/td>Diaphragm gas meters查看
標準AS/NZS IEC 61672.1:2019電聲學 聲級計 第1部分:規范Electroacoustics - Sound level meters, Part 1: Specifications查看
標準AS/NZS IEC 61672.2:2019電聲學 聲級計 第2部分:型式評價試驗Electroacoustics — Sound level meters, Part 2: Pattern evaluation tests查看
標準AS/NZS IEC 61672.3:2019電聲學 聲級計 第3部分:定期試驗Electroacoustics - Sound level meters, Part 3: Periodic tests查看
標準AS 1284.1-2004電量計量 第1部分:普通感應式電能表Electricity metering, Part 1: General purpose induction watthour meters查看
標準AS 1284.4-2006電量計量 第4部分:插座安裝系統Electricity metering, Part 4: Socket mounting system查看
標準AS 1284.10.2-2006電量計量 第10.2部分:電表讀數、資費和負荷控制用數據交換 通過手持式設備(HHU)進行直接本地?cái)?shù)據交換 ANSI標準接口Electricity metering, Part 10.2: Data exchange for meter reading, tariff and load control — Direct local data exchange via hand-held unit (HHU) — ANSI Standard interface查看
標準AS 1284.11-1995電量計量 第11部分:?jiǎn)蜗喽喙δ茈娔鼙?/td>Electricity metering, Part 11: Single-phase multifunction watthour meters查看
標準AS 1284.12-1995電量計量 第12部分:多相多功能電能表(1級)Electricity metering, Part 12: Polyphase multifunction (non-demand) watthour meters (Class 1)查看
標準AS/NZS 1284.13:2002電表  第13部分:在役符合性試驗Electricity metering, Part 13: In-service compliance testing查看
標準AS/NZS 2399-1998聲學  個人聲暴露計規范Acoustics - Specifications for personal sound exposure meters查看
標準AS/NZS 3837:1998氧耗量熱計測試材料和產品的釋熱性和生煙性的測試方法Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter查看
標準AS 3565.1-2010冷熱飲用水和非飲用水供應用儀表 第1部分:技術要求Meters for cold and heated drinking and non-drinking water supplies, Part 1: Technical requirements查看
標準AS 3565.4-2007冷熱飲用水和非飲用水供應用儀表 第4部分:在役符合性試驗Meters for cold and heated drinking and non-drinking water supplies, Part 4: In-service compliance testing查看
標準AS 4747.1-2013非城市供水用儀表 第1部分:術語表Meters for non-urban water supply, Part 1: Glossary of terms查看
標準AS 4747.2-2013非城市供水用水表 第2部分:完全充電的封閉管道水表的技術要求Meters for non-urban water supply, Part 2: Technical requirements for closed conduit meters fully charged查看
標準AS 4747.3-2013非城市供水用水表 第3部分:明渠水表技術要求Meters for non-urban water supply, Part 3: Technical requirements for open channel meters查看
標準AS 4747.5-2013非城市供水用水表 第5部分:完全充電的封閉管道水表的安裝和調試Meters for non-urban water supply, Part 5: Installation and commissioning of closed conduit meters fully charged查看
標準AS 4747.6-2013非城市供水用水表 第6部分:明渠水表的安裝和調試Meters for non-urban water supply, Part 6: Installation and commissioning of open channel meters查看
標準AS 4747.8-2013非城市供水用水表 第8部分:非城市水表在役符合性Meters for non-urban water supply, Part 8: In-service compliance for non-urban water meters查看
標準AS/NZS 4944-2006煤氣表  在役符合性試驗Gas meters - In-service compliance testing查看
標準AS 3778.6.1:2022明渠水流量的測量 第6.1部分:測量裝置、儀器和設備 轉子流量計Measurement of water flow in open channels, Part 6.1: Measuring devices, instruments and equipment — Rotating-element current meters (ISO 2537:2007, IDT)查看
標準AS 3778.6.2:2022明渠水流量的測量 第6.2部分:測量裝置、儀器和設備 直接測深和懸吊設備Measurement of water flow in open channels, Part 6.2: Measuring devices, instruments and equipment — Direct depth sounding and suspension equipment (ISO 3454:2008, IDT)查看
標準AS 3778.6.3-1992明渠水流量的測量 第6.3部分:測量裝置、儀器和設備 直明槽中轉子流量計的校準Measurement of water flow in open channels, Part 6.3: Measuring devices, instruments and equipment — Calibration of rotating element current-meters in straight open tanks查看
標準AS 3778.6.4:2022明渠水流量的測量 第6.4部分:測量裝置、儀器和設備 水深測量用回聲測深儀Measurement of water flow in open channels, Part 6.4: Measuring devices, instruments and equipment — Echo sounders for water depth measurements (ISO 4366:2007, IDT)查看
標準AS 3778.6.5-2001明渠水流量的測量 第6.5部分:測量裝置、儀器和設備 水位測量裝置Measurement of water flow in open channels, Part 6.5: Measuring devices, instruments and equipment — Water level measuring devices查看
標準AS 3778.6.6-2008明渠水流量的測量 第6.6部分:測量裝置、儀器和設備 河流測量用索道系統Liquid flow measurement in open channels, Part 6.6: Measuring devices, instruments and equipment — Cableway systems for stream gauging查看
標準AS 3778.6.7-1992明渠水流量的測量 第6.7部分:測量裝置、儀器和設備 超聲波(聲學)測速儀Measurement of water flow in open channels, Part 6.7: Measuring devices, instruments and equipment — Ultrasonic (acoustic) velocity meters查看
標準AS 3778.6.8-1992明渠水流量的測量 方法6.8:測量裝置、儀器和設備 水文測量船用定位設備Measurement of water flow in open channels, Method 6.8: Measuring devices, instruments and equipment — Position fixing equipment for hydrometric boats查看
型式批準文件要求NMI M 1長度測量?jī)x器型式批準規范Pattern Approval Specifications for Length Measuring Instruments查看
型式批準文件要求NMI M 3面積測量?jī)x器型式批準規范Pattern Approval Specifications for Area Measuring Instruments查看
型式批準文件要求NMI R 129多維測量?jī)x器Multi-dimensional Measuring Instruments查看
型式批準文件要求NMI M 2飲料機型式批準規范Pattern Approval Specifications for Beverage Dispensers查看
型式批準文件要求NMI R 81低溫液體動態測量裝置和系統Dynamic Measuring Devices and Systems for Cryogenic Liquids查看
型式批準文件要求NMI R 105大流量用直接式質量流量測量系統Direct Mass Flow Measuring Systems for Quantities of Liquids查看
型式批準文件要求NMI R 117 非水液體測量系統Measuring Systems for Liquids Other than Water查看
型式批準文件要求NMI R 118機動車加油機型式評價的測試程序和測試報告格式Testing Procedures and Test Report Format for Pattern Evaluation of Fuel Dispensers for Motor Vehicles查看
型式批準文件要求NMI R 139車輛用壓縮氣體燃料測量系統Compressed Gaseous Fuel Measuring Systems for Vehicles查看
型式批準文件要求NMI M 4牛奶罐型式批準規范Pattern Approval Specifications for Milk Tanks查看
型式批準文件要求NMI R 71固定式儲罐 一般要求Fixed Storage Tanks. General Requirements查看
型式批準文件要求NMI R 80-1帶液位計的公路和鐵路罐車  第1部分:計量和技術要求Road and rail tankers with level gauging  Part 1: Metrological and technical requirements查看
型式批準文件要求NMI R 80-2帶液位計的公路和鐵路罐車  第2部分:計量控制和測試Road and rail tankers with level gauging  Part 2: Metrological controls and tests查看
型式批準文件要求NMI R 80-3帶液位計的公路和鐵路罐車  第3部分:型式評價報告格式Road and rail tankers with level gauging  Part 3: Report Format for type evaluation查看
型式批準文件要求NMI R 85-1 & 2用于測量固定式儲罐中液體液位的自動液位計  第1部分:計量和技術要求和第2部分:計量控制和測試Automatic Level Gauges for Measuring the Level of Liquid in Stationary Storage Tanks  Part 1: Metrological and Technical Requirements  Part 2: Metrological Control and Tests查看
型式批準文件要求NMI R 85-3用于測量固定式儲罐中液體液位的自動液位計  第3部分:型式評價報告格式Automatic Level Gauges for Measuring the Level of Liquid in Stationary Storage Tanks  Part 3: Report Format for Type Evaluation查看
型式批準文件要求NMI R 125儲罐中液體質量的測量系統Measuring Systems for the Mass of Liquids in Tanks查看
型式批準文件要求NMI R 33空氣中稱量結果的常規值Conventional Value of the Result of Weighing in Air查看
型式批準文件要求NMI R 50-1連續累計自動衡器(皮帶秤)  第1部分:計量和技術要求Continuous totalising automatic weighing instruments (belt weighers)  Part 1: Metrological and technical requirements查看
型式批準文件要求NMI R 50-2連續累計自動衡器(皮帶秤)  第2部分:測試程序Continuous totalising automatic weighing instruments (belt weighers)  Part 2: Test procedures查看
型式批準文件要求NMI R 50-3連續累計自動衡器(皮帶秤)  第3部分:測試報告格式Continuous totalising automatic weighing instruments (belt weighers)  Part 3: Test report format查看
型式批準文件要求NMI R 51自動分檢衡器Automatic Catchweighing Instruments查看
型式批準文件要求NMI R 60稱重傳感器計量規程Metrological Regulation for Load Cells查看
型式批準文件要求NMI R 76-1非自動衡器  第1部分:計量和技術要求—測試Non-automatic Weighing Instruments  Part 1: Metrological and Technical Requirements – Tests查看
型式批準文件要求NMI R 76-2非自動衡器  第2部分:測試報告格式Non-automatic Weighing Instruments  Part 2: Test report format查看
型式批準文件要求NMI R 106自動軌道衡Automatic Rail Weighbridges查看
型式批準文件要求NMI R 107非連續累計自動衡器(累計料斗秤)Discontinuous Totalising Automatic Weighing Instruments (Totalising Hopper Weighers)查看
型式批準文件要求NMI M 6-1電表  第1部分:計量和技術要求Active-Energy Electricity Meters  Part 1: Metrological and Technical Requirements查看
型式批準文件要求NMI M 6-2電表  第2部分:測試報告格式Electricity Meters  Part 2: Test Report Format 查看
型式批準文件要求NMI M 10-1用于計量全流量管道中的水的儀表  第1部分:計量和技術要求Meters Intended for the Metering of Water in Full Flowing Pipes  Part 1: Metrological and Technical Requirements 查看
型式批準文件要求NMI M 10-2用于計量全流量管道中的水的儀表  第2部分:測試方法Meters Intended for the Metering of Water in Full Flowing Pipes  Part 2: Test Methods 查看
型式批準文件要求NMI M 10-3用于計量全流量管道中的水的儀表  第3部分:測試報告格式Meters Intended for the Metering of Water in Full Flowing Pipes  Part 3: Test Report 查看
型式批準文件要求NMI M 11-1用于計量明渠和部分填充管道中的水的儀表  第1部分:計量和技術要求Meters Intended for the Metering of Water in Open Channels and Partially Filled Pipes  Part 1: Metrological and Technical Requirements 查看
型式批準文件要求NMI M 11-2用于計量明渠和部分填充管道中的水的儀表  第2部分:測試方法Meters Intended for the Metering of Water in Open Channels and Partially Filled Pipes  Part 2: Test Methods查看
型式批準文件要求NMI M 11-3用于計量明渠和部分填充管道中的水的儀表  第3部分:測試報告格式Meters Intended for the Metering of Water in Open Channels and Partially Filled Pipes  Part 3: Test Report查看
型式批準文件要求NMI R 49-1飲用冷水水表和熱水水表  第1部分:計量和技術要求Water meters for cold potable water and hot water  Part 1: Metrological and technical requirements查看
型式批準文件要求NMI R 49-2飲用冷水水表和熱水水表  第2部分:測試方法Water meters for cold potable water and hot water  Part 2: Test methods查看
型式批準文件要求NMI R 49-3飲用冷水水表和熱水水表  第3部分:測試報告格式Water meters for cold potable water and hot water  Part 3: Test report format查看
型式批準文件要求NMI R 137-1&2燃?xì)獗?nbsp; 第1部分:計量和技術要求和第2部分:計量控制和性能測試Gas Meters  Part 1: Metrological and Technical Requirements  Part 2: Metrological Controls and Performance Tests查看
型式批準文件要求NMI M 8谷物蛋白質測量?jī)x型式批準規范Pattern Approval Specifications for Protein Measuring Instruments for Grain查看
型式批準文件要求NMI R 14符合ICUMSA國際糖度標尺的旋光糖量計Self-indicating Polarimetric Saccharimeters Graduated in Accordance with the ICUMSA International Sugar Scale查看
型式批準文件要求NMI M 7銷售終端(POS)系統的型式批準規范Pattern Approval Specifications for Point of Sale Systems查看
型式批準文件要求-銷售終端(POS)系統型式批準指導文件Guidance document -Pattern approval of point of sales systems查看
型式批準文件要求NMI M 5制動力測量?jī)x器型式批準規范Pattern Approval Specifications for Brake Force Measuring Instruments for Legal Use查看
型式批準文件要求NMI R 126呼出氣體酒精含量檢測儀型式批準規范Pattern Approval Specifications for Evidential Breath Analysers查看
型式批準文件要求NMI P 106計量器具型式批準和認證程序Procedures for the Approval and Certification of Patterns of Measuring Instruments查看
測試程序-測試程序的一般信息General Information for Test Procedures查看
測試程序-預包裝產品的抽樣和測試程序Sampling and Test Procedures for Prepackaged Products查看
測試規程NITP 0測量?jī)x器的國家通用儀器測試規程General National Instrument Test Procedures for Measuring Instruments查看
測試規程NITP 1長度測量?jī)x器National Instrument Test Procedures for Length Measuring Instruments查看
測試規程NITP 2面積測量?jī)x器National Instrument Test Procedures for Area Measuring Instruments查看
測試規程NITP 3.11 mg至20 kg貿易質量National Instrument Test Procedures for Trade Masses of 1 mg to 20 kg查看
測試規程NITP 4.2飲料機National Instrument Test Procedures for Beverage Dispensers查看
測試規程NITP 4.3酒精飲料器具National Instrument Test Procedures for Alcoholic Beverage Measures查看
測試規程NITP 4.4潤滑油器具National Instrument Test Procedures for Lubricating Oil Measures查看
測試規程NITP 4.5刻度器具National Instrument Test Procedures for Graduated Measures查看
測試規程NITP 5.1加油機(非液化石油氣加氣機)National Instrument Test Procedures for Fuel Dispensers other than LPG Dispensers查看
測試規程NITP 5.2液態烴(非液化石油氣)容積計量系統National Instrument Test Procedures for Bulk Flowmetering Systems for Liquid Hydrocarbons other than LPG查看
測試規程NITP 6.1 to 6.4非自動衡器National Instrument Test Procedures for Non-automatic Weighing Instruments查看
測試規程NITP 6.5連續累計自動衡器(皮帶秤)National Instrument Test Procedures for Continuous Totalising Automatic Weighing Instruments (Belt Weighers)查看
測試規程NITP 6.6自動軌道衡National Instrument Test Procedures for Automatic Rail Weighbridges查看
測試規程NITP 6.7自動包裝皮帶秤National Instrument Test Procedures for Automatic Packaging Conveyor Weighers查看
測試規程NITP 6.8輪式裝載機National Instrument Test Procedures for Wheeled Loaders查看
測試規程NITP 8牛奶罐National Instrument Test Procedures for Milk Tanks查看
測試規程NITP 9汽車油箱National Instrument Test Procedures for Vehicle Tanks查看
測試規程NITP 10.1液化石油氣(LPG)加氣機National Instrument Test Procedures for LPG Dispensers查看
測試規程NITP 10.2散裝液化石油氣(LPG)流量計量系統National Instrument Test Procedures for Bulk LPG Flowmetering Systems查看
測試規程NITP 12.1壓縮天然氣(CNG)加氣機National Instrument Test Procedures for CNG Dispensers查看
測試規程NITP 14公用事業計量?jī)x表(電表、水表)National Instrument Test Procedures for Utility Meters查看
測試規程NITP 15.1谷物質量測量?jī)x器 蛋白質測量?jī)x器National Instrument Test Procedures for Measuring Instruments for Grain Quality - Protein Measuring Instruments查看
測試規程NITP 15.2蔗糖質量測量?jī)x器 第1部分:自指示旋光糖量計National Instrument Test Procedures for Measuring Instruments for Cane Sugar Quality  Part 1:Self-indicating Polarimetric Saccharimeters查看
測試規程NITP 17.1密度比重計 第1部分:蔗汁錘度計National Instrument Test Procedures for Density Hydrometers  Part 1: Brix Hydrometers for Cane Juice查看


廣東省農食產品技術性貿易措施(WTO/SPS)信息平臺 廣東省農業標準化信息服務平臺
x